COMBI BOILER Review – BOILER Install AT Home, Baxi 600 Critique, Baxi 624 630 636 Complete installs of the new Baxi 636 combi boiler on two zone at my property in Leeds. The new Baxi 600 range of Combi Boiler. I am going to put in a new boiler in my personal residence. So, at the instant we have received a boiler which is here, and we want to place a fridge in this cabinet. So, what I am likely to do is I’m heading to board the wall out guiding, and we are likely to move the boiler and put it on the again wall. Well, we are heading to set up a new boiler, but we’re heading to place it on the again wall.
I’m also going to put a weather conditions comp sensor on this, so we are going to have the weather comp so that in the hotter climate, the flue temperatures will be decrease. So, that’ll help save us income on our gasoline payments as effectively.

I’m also … I’ve obtained some zone valves, so we’re going to place it onto an S-Approach. So, for an S-Plan, we want a zone valve for downstairs, and then we will have a zone valve for upstairs. And then clearly which is how you would manage the heating procedure. And then you would use the nest for thermostats then to regulate them.
I am also likely to ability flush this method, so I am heading to link it onto the old boiler and flush it with the aged boiler in spot.
So, as I board the wall out in listed here, I’m searching at where I put my supports, and I’m wanting at the template for the boiler. So, this is a Baxi 600 boiler, so it is really the new 636 boilers. So, I am just seeking where by the screw holes are, and I’m likely to set the supports where that is.
So, I am just making use of the template so I can mark and hook up all the pipes together. You see there? Just obtained the bypass on that.
Right, so we’ve acquired some of the pipes in now. So, just to explain what is heading on here, so the Baxi 600 has place so you can set the pipes up the back again. So, what I’ve obtained below, I have got our flue there. This flue goes up to there, and then it goes throughout there. And we have acquired a bypass due to the fact we have acquired this on an S-Program, we’ve obtained a bypass. And then which is the return.
So, then also at the bottom there we have acquired this filter. So we’ve obtained an Omega filter on there. So, that’s the return, back again into the boiler. And then from the leading there, so if we go all over the flue, we’ve got two zones. And then we’re just heading to have a handbook air vent out there, just so we can bleed that area of pipework.
So, we’ve bought a single of our zone valves there, and I am just heading to pop yet another zone valve listed here now. And then just to demonstrate you on the zone valve, most of you will know this now, but you can find just an A and you will find a B. So the zone valve only goes one particular way. So, you need to have to make sure you place it on the appropriate way close to. So, on this one particular, the A will come down from the flue, in that path, so when you search at the valve there, the flue would go that way.

So, we have acquired the Baxi 636 that we are setting up in this dwelling, in my home. So, you can invest in the pipes from Baxi that are pre-produced, that’ll come up the again. And you also get this bracket, and that certainly will clip the pipes. And then when you look … so you can place 22 up the back again great and straightforward there.

So, now I’ve pre-marked exactly where I’m placing all the pipes. I’ve built it up as a template. Mainly because it is really push healthy, I can now unclip it off, and then what I’m likely to do is I’m going to take the paper back off. And I am also likely to get rid of the clips off there. They were just to hold it in location although I linked it all collectively.

So, I have just lifted the boiler on to the bracket now. So, I’ve just got our filter related in now. I have just done code. And I am just going to do the pipe.

So, we’re making use of this new Hilti NPR 19A. So, that’s a 22-volt press gun for this. And I’m just performing fuel now. I just preferred to demonstrate you these gas fittings. So, the gas fittings have got a yellow/gold ring.

So, I use push fitting on most of my installs. One of the positive aspects of push fitting is you can make it all up absent from the boiler if you need to have to. Also, there is certainly no flux heading into the technique, so it won’t acquire us lengthy to flush the procedure out right after.

Also on this, I am likely to set a shock arrester on. So, I’ve got some lock limited 577, so as an alternative of making use of PTFE, this is a mile improved than PTFE. So, all you do with this is get your thread and just squirt a minimal bit on your thread like that. And then as soon as you’ve received some on your thread, you just tighten that on to your fitting.

So, it is really truly easy to use push fit. So we just get our fitting, glance inside, check that they are in, and make certain they’re not damaged. Connect it onto the close of our pipe. Some brands will give you it is really like a little instrument you can use, like a bit of plastic, and then you can mark this pipe here. Baxi 636 624 630 Combi boiler, New Baxi Boiler

Scroll to Top